Espelho de extremidade do guiador

Ir para a loja de marca Highsider

Faróis, luzes de pisca, espelhos retrovisores e acessórios

A marca alemã Highsider simboliza, acima de tudo, tecnologia de iluminação inovadora. A gama da Highsider abrange, entre outros, provavelmente a menor luz de pisca LED aprovada, luzes de pisca/traseiras combinadas e faróis principais LED com luz de médios, luz de máximos e luz de estacionamento na mais recente tecnologia LED. Materiais de alta qualidade, um cuidadoso processo de fabrico e um design coerente tornam os produtos da Highsider no acabamento individual perfeito para todos os motociclos. Tal aplica-se igualmente à gama de espelhos retrovisores da Highsider. O melhor de tudo: para o que oferecem, os produtos da Highsider são extremamente acessíveis.

Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approval for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by TÜV (German Technical Inspection Association) is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At at a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.

Original parts on newer vehicles that have been given an "E" mark at the factory may only be replaced with accessories that have likewise undergone E-approval. An E-certified mirror may not, for example, by replaced with a mirror that only has TÜV approval under the German vehicle licensing regulations.

Dimension sketch mirror