Relé eletrónico de 2 canais 6-14V

HIGHSIDER has an electronic two-channel relay 6 - 14 V in its range (with even more functions than the predecessor HIGHSIDER *Plus - Minus Converter CB3*).
With this relay you can control the desired function via plus as well as via minus. Connections for all common push-buttons or switches are available for this purpose.

And this is how it works:
If you connect one of the two inputs to earth or plus via a switch, the corresponding 12 V output is switched on. The outputs can supply lines with up to 40 W in continuous operation. Typical power consumers that are operated via non-latching push-buttons (e.g. horn, low beam, high beam, etc.) can be controlled with the HIGHSIDER 2-channel 6 - 14 V relay.
The use of the relay instead of a direct connection of the consumer to the switch, allows the use of smallest cable cross sections and push buttons with low current values.

• Allows extremely thin cable cross-sections for the connection of the push-buttons.
• Use of switches for low currents despite consumers with high currents
• Extends the life of switches
• 2 independent channels
• Very small dimensions and low weight
• Relay is completely sealed (waterproof)
• smaller and more flexible than expensive multi-channel switch boxes
• offers protection against all possible wiring errors

Dimensions:

• Width: 17 mm
• depth: 9.5 mm
• Height: 17 mm
• Weight: 9 g

Connections:

• Red (thick) = ignition plus 12V (+)
• Yellow (thick) = working output CH2 (+)
• Blue (thick) = working output CH1 (+)
• Yellow (thin) = control plus signal CH2
• Blue (thin) = Control plus signal CH1
• Yellow/black (thin) = Control minus signal CH2
• Blue/black (thin) = control minus signal CH1
• Maximum power: 30 watts

Scope of delivery:
1 x HIGHSIDER Electronic 2-channel relay 6 - 14 V.


Application example 1 :
You want to use a small push button with a low flow current, for example to switch a horn (high current consumption). To prevent the button from being damaged by the power it normally draws, simply use this electronic relay. It allows you to use switches or buttons to switch high currents.

Application example 2:
On some motorbikes (e.g. INDIAN), the indicator ground is clocked.
This means: With the help of the electronic dual-channel relay, you can now convert the ground-clocked indicator to positive. This means that all indicator, turn signal/rear light combinations or turn signal/position lights can still be used.
(For the conversion to a turn signal/rear light combination, you need 1 x the electronic relay for your vehicle).

Fabricante: Paaschburg & Wunderlich GmbH | Am Alten Lokschuppen 10a | 21509 Glinde | Alemanha | +49 402482770 | info@pwonline.de | www.pwonline.de