Micro Rhombus Dark

Ir para a loja de marca KELLERMANN

Design pioneiro de luzes de pisca

Os produtos da Kellermann são parte integrante da gama de acessórios da Louis há já 15 anos, pois os nossos clientes valorizam, tanto como a imprensa especializada, as luzes de pisca de guiador e de tamanho mini com um design com estilo, tecnologia inovadora e fabrico de qualidade da Kellermann. A Kellermann vence sem parar testes e prémios de design. E os especialistas de Aachen estão constantemente a surpreender com novas ideias e tecnologia cada vez mais sofisticada.
Apesar de todo o entusiasmo pela gama de luzes de pisca, não nos podemos esquecer de que a Kellermann também produz extremidades do guiador antivibração, suportes de matrícula e ferramentas especiais para correntes de transmissão – tudo produtos que usufruem da mesma excelente reputação entre conhecedores: qualidade de topo e segurança operacional verificada pela TÜV "made in Germany".

Kellermann - Made In Germany

.

Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approval for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by TÜV (German Technical Inspection Association) is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At at a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.

Original parts on newer vehicles that have been given an "E" mark at the factory may only be replaced with accessories that have likewise undergone E-approval. An E-certified mirror may not, for example, by replaced with a mirror that only has TÜV approval under the German vehicle licensing regulations.